Fedine.net

Gold is the most malleable and ductile metal; a single gram can be beaten into a sheet of one square meter, or an ounce into

300 square feet. Gold leaf can be beaten thin enough to become translucent. The transmitted light appears greenish blue,

because gold strongly reflects yellow and red. Gold readily forms alloys with many other metals. These alloys can be produced

to increase the hardness or to create exotic colors (see below). Native gold contains usually eight to ten percent silver,

but often much more — alloys with a silver content over 20% are called electrum. As the amount of silver increases, the color

becomes whiter and the specific gravity becomes lower.

Gold is a good conductor of heat and electricity, and is not affected by air and most reagents. Heat, moisture, oxygen, and

most corrosive agents have very little chemical effect on gold, making it well-suited for use in coins and jewelry;

conversely, halogens will chemically alter gold, and aqua regia dissolves it via formation of the chloraurate ion.

Common oxidation states of gold include +1 (gold(I) or aurous compounds) and +3 (gold(III) or auric compounds). Gold ions in

solution are readily reduced and precipitated out as gold metal by adding any other metal as the reducing agent. The added

metal is oxidized and dissolves allowing the gold to be displaced from solution and be recovered as a solid precipitate.

Recent research undertaken by Sir Frank Reith of the Australian National University shows that microbes play an important

role in forming gold deposits, transporting and precipitating gold to form grains and nuggets that collect in alluvial

deposits.[1]

High quality pure metallic gold is tasteless, in keeping with its resistance to corrosion (it is metal ions which confer

taste to metals).

In addition, gold is very dense, a cubic meter weighing 19300 kg. By comparison, the density of lead is 11340 kg/m³, and the

densest element, Iridium, is 22650 kg/m³.